How to find an appliance's wattage
The calculator is only as good as the watts you give it. Here is where that number usually lives, and what to do if you cannot find it.
Read the nameplate
Look on the back, the underside, or inside a door for a label with W, watts, or a voltage and a current. A marking such as “120 V, 12.5 A” is 120 × 12.5 = 1,500 W. Use the running or rated current, not “LRA” or starting amps.
Use the manual or a product sheet
Many manuals list running watts, cooling watts, or a power-consumption table. For refrigerators and freezers, the yearly kWh on an energy label is often better than a single wattage. Enter that in the calculator's yearly-kWh mode.
When you only have a typical figure
The presets on this site are clearly labelled typical figures, not measurements of your machine. They are fine for a planning estimate. Swap them for a label figure when you have one.
What not to use
Generator “starting watts,” marketing peak watts, and the size of the plug or breaker are not the same as running watts. If two figures disagree, prefer a measured running wattage or a yearly kWh label.