How to calculate what an appliance costs to run

You only need three numbers: running watts, how long it runs, and the usage rate on your bill. A fourth number, duty cycle, matters when the machine cycles on and off.

Step 1 — Get the watts

Read the nameplate, the manual, or a measured figure. See how to find wattage. Do not use the starting or surge watts for a cost estimate.

Step 2 — Turn watts and time into kWh

kWh = (watts ÷ 1,000) × hours

A 1,500 W heater running for 8 hours: 1,500 ÷ 1,000 × 8 = 12 kWh. The watts to kWh calculator does this for you.

Step 3 — Apply a duty cycle if it cycles

If the compressor or element is only on some of the time, multiply by that percentage. 150 W for 24 hours at 33% duty is 150 ÷ 1,000 × 24 × 0.33 = 1.188 kWh.

Step 4 — Multiply by your usage rate

cost = kWh × price per kWh

12 kWh at 18.16¢ is 12 × 0.1816 = $2.18. Standing charges are billed separately. Defaults and sources are listed on the rates page.

Running cost calculator

Presets are typical figures, not a measurement of your machine. Use the nameplate watts or the Energy Guide yearly kWh when you have them.

Use 100 if it draws steadily. Use a lower figure for a fridge or air conditioner that cycles.

Use the usage rate from your bill, not the standing charge. Defaults are planning figures only.

Common questions

What is the formula for appliance running cost?

kWh = (watts ÷ 1,000) × hours × (duty cycle ÷ 100). Cost = kWh × the usage rate per kWh.

What is a duty cycle?

The share of time the appliance is actually drawing its running watts. A fridge compressor might be on about a third of the day.